technical datasheet
Rupes SKORPIO II RH256 Random orbital palm sander.pdf
Rupes SKORPIO II RH256 Random orbital palm sander.pdf
| Producer: | Rupes |
|---|---|
| Product code: | RH356A |
| Delivery time: | 7 days |
| Warranty: | 12 months |
| Rating: | ( 4228 ratings ) |
CHARACTERISTIC
Pneumatic eccentric palm sander with high performance and reduced air consumption. The Skorpio III is what every random orbital sander operator needs-an extremely quiet tool that has tremendous power and low vibration. The new high performance motor is designed to provide the best power to weight ratio with a lower air consumption. Following several years of on-site research, Rupes R&D department found that a 6mm orbit is ideal for creating the best combination of material removal/ surface finish. The 6 mm orbit is 20% more time efficient than the traditional 5mm orbit and, when used with the suggested abrasive grades between P120 and P320, generates the same high quality finish.
TECHNICAL DATA
| Velcro | yes | |
| Ø orbit | mm | 6 |
| Ø backing pad | mm | 150 |
| Working pressure | bar | 6,2/90 |
| Max consumption air | l/min | 340 |
| R.P.M. | 0-11.000 | |
| Weight | Kg | 0,8 |
| Speed control | yes | |
| Air inlet thread | 1/4"GAS | |
| Wheel spindle thread | M8-F |
